Likes Likes:  78
Page 1 of 4 123 ... LastLast
Results 1 to 10 of 36

Thread: A brief look back in(side) time.

  1. #1
    Happily unadjusted 😜 popoki nui's Avatar
    Join Date
    Nov 2014
    Location
    Vancouver Island.
    Posts
    4,384

    A brief look back in(side) time.

    I'm not really sure in which forum this belongs best, so I'll just try here.

    I needed to perform a small corrective procedure on one of my Pulsar Time Computer LED watches. I was delaying that until it was time to change batteries, which I did today, and I thought it might be of interest to some (some/few/none etc) of you to come with me for a look inside what was the world's first solid-state timepiece.
    Name:  Big Time 1008.jpg
Views: 127
Size:  40.3 KB
    My P4-series "Big Time" from 1975. In order to not have to push a button to see the time, Pulsar included the "Auto Command" system; a tiny glass mercury rocker switch which activated the LED display with a flick of the wrist. Great in theory, but few worked correctly. Often they were either too sensitive, or not sensitive enough. Mine was much too sensitive, which caused excessinve battery drain. So the procedure today was to disconnect the mercury switch while I was replacing the batteries.
    Name:  Big Time 1.jpg
Views: 121
Size:  62.8 KB

    The case back is a two-piece affair: a stamped stainless steel back with battery contacts, attached to the case by a threaded locking ring:
    Name:  Case back.jpg
Views: 123
Size:  62.4 KB
    A little tricky to thread properly and not cross-thread, but the system has the advantage of not twisting/distorting the O-ring on the case as can happed with one-piece threaded case backs. Help to keep Pulsar water resistant.

    The back of the module:
    Name:  Module back1.jpg
Views: 124
Size:  66.6 KB
    Name:  Module back2.jpg
Views: 122
Size:  64.8 KB
    The module is held in place by two tiny screws. Under the 403 identification sticker is the quartz crystal, which zips along at the common 32,768Hz. To adjust the timing to the 60 seconds/year it is capable of, Pulsar repair centres had their own timing machine, and adjustments were made via the square~ish shaped trimmer and a special tool.

    Front of the module:
    Name:  Module front1.jpg
Views: 125
Size:  105.6 KB
    Time Computer modules were unique: they used glass tubes containing magnetic reed switches on the module, and command buttons containing tiny, very powerful rare-earth magnets and a curved leaf spring. When the button is pressed, the tiny magnet inside moves closer to reed switches (upper and lower in the photo) immediately adjacent to each button; the reeds connect and sends the time or date signal to the LED display. Earlier models used the same system to set the time and date, too. Trippy, eh? As complicated as this sounds, the advantage is that the button(s) are completely sealed from the inside, via a metal plate soldered in place. So nothing penetrates the case, including water.

    Name:  diagram1.jpg
Views: 119
Size:  64.5 KB
    Name:  Case inside1.jpg
Views: 119
Size:  70.8 KB

    Other cool features were completely epoxy-sealed LED's and silicone-sealed microchip (so if water ever did get inside, the important bits weren't damaged), and an ambient light sensor which brightened and dimmed the LED display based on the brightness of the immediate environment. That helped save battery power.
    Pulsar red "time screen" crystals were either red tempered glass, or synthetic sapphire with a red laminated filter (yes, we had sapphire crystals way back then!), and were bonded to the case with aerospace-grade epoxy. That, and the sealed command buttons and case back O-ring meant Pulsar could easily withstand useable depths of up to 100ft. So you needn't gasp in horror when you see my Pulsars in the water!

    My little disconnection procedure involved simply cutting the "L" shaped flat wire at the base of the Auto Command switch in the module photo above. Then it was just a matter of checking/lubricating the back O-ring, installing fresh high-drain cells, and reinstalling the case back.

    Done!
    Name:  Date display.jpg
Views: 124
Size:  48.2 KB

    Those of you still awake...thanks for reading!

    ~Sherry.
    Last edited by popoki nui; May 5, 2015 at 06:33 AM.
    Eterna | Tudor | Seiko | Casio | G-Shock | Orient | Swatch | Mondaine | Zodiac (pre-Fossil) | Rolex | Wenger | Hamilton Pulsar Time Computer | Omega | Timex | Bucherer | Citizen



    Like IWL on Facebook!


  2. #2
    A fascinating post, Sherry, thank you
    Apeks | Archimede | Breitling | Bulova | Cabot Watch Company | Casio | Daniel Wellington | Davosa | Glycine | G-Shock | Hamilton | Nomos | Omega | Rolex | Seiko | Slow | Swatch | Timex | Vostok

  3. Likes iyonk liked this post
  4. #3
    Very interesting post.
    There's nothing important to read here.

  5. Likes popoki nui liked this post
  6. #4
    Adjusted in 6 positions tempocalypse's Avatar
    Join Date
    Dec 2014
    Location
    Maldives
    Posts
    1,274
    Very cool! Perfect design example of the 70s vision of the future and still has a relevant retro futuristic vibe to it today. Now that you've disconnected the mercury rocker, do you need to activate with a button now?
    Watch centric instagram: @tempocalypse

  7. Likes popoki nui liked this post
  8. #5
    That's AWESOME Sherry!!! as a BIG digital watch fan, i always fascinated by these retro/vintage digital timepiece... wow, what a great opportunity to look inside the case of these legends!!

    BIG THANK YOU Sherry!!

  9. Likes popoki nui liked this post
  10. #6
    Amazing, Sherry. I am in awe of your watch knowledge and technical expertise. Thanks for sharing.

    Jane

  11. Likes popoki nui liked this post
  12. #7
    Happily unadjusted 😜 popoki nui's Avatar
    Join Date
    Nov 2014
    Location
    Vancouver Island.
    Posts
    4,384
    Quote Originally Posted by tempocalypse View Post
    Very cool! Perfect design example of the 70s vision of the future and still has a relevant retro futuristic vibe to it today. Now that you've disconnected the mercury rocker, do you need to activate with a button now?
    Yes. Doesn't bother me though; just part of the fun!

    ~S.
    Eterna | Tudor | Seiko | Casio | G-Shock | Orient | Swatch | Mondaine | Zodiac (pre-Fossil) | Rolex | Wenger | Hamilton Pulsar Time Computer | Omega | Timex | Bucherer | Citizen



    Like IWL on Facebook!


  13. #8
    Very interesting, Sherry.

    I was too young - and the watches too expensive back then - when these "novelties" arrived to the market. I never had a chance to get one. As you know (much better than me) they started to be replaced for the more usual LCDs so, somehow, they did not make part of my interest in watches. Glad you had the generosity to post this information here. Thank you, Sherry.

  14. Likes iyonk, Seriously liked this post
  15. #9
    Happily unadjusted 😜 popoki nui's Avatar
    Join Date
    Nov 2014
    Location
    Vancouver Island.
    Posts
    4,384
    Quote Originally Posted by CFR View Post
    Very interesting, Sherry.

    I was too young - and the watches too expensive back then - when these "novelties" arrived to the market. I never had a chance to get one. As you know (much better than me) they started to be replaced for the more usual LCDs so, somehow, they did not make part of my interest in watches. Glad you had the generosity to post this information here. Thank you, Sherry.
    The early LED-LCD story is interesting. Seiko hit quartz market first with Astron, but Hamilton Pulsar was the first completely solid-state wristwatch. Seiko never made LED watches; I think they saw the shortcomings of the LED display (poor battery life, two-handed operation, poor visibility in bright daylight), and went the LCD route. But despitetheir technological prowess, Seiko's LCD lagged behind Pulsar's LED throughout most of the 1970's in terms of function. By 1975, Seiko had barely introduced a digital watch with a date (and one with a basic chronograph), and their watches had no shock or water resistance. Pulsar watches, comparatively, had month, date, AM/PM, and they had the world's first calculator watch, which even included a memory. And the non-calc Pulsars were functionally water resistant to 100ft, and shock resistant to 2500 G.
    Yet those obvious shortcomings of the LED display vs the LCD couldn't be ignored for long, and by the late 70's, the LED's short run was over.
    (FYI: LED= Light Emitting Diode. LCD= Liquid Crystal Display.)

    ~Sherry.
    Last edited by popoki nui; May 5, 2015 at 07:02 PM.
    Eterna | Tudor | Seiko | Casio | G-Shock | Orient | Swatch | Mondaine | Zodiac (pre-Fossil) | Rolex | Wenger | Hamilton Pulsar Time Computer | Omega | Timex | Bucherer | Citizen



    Like IWL on Facebook!


  16. Likes iyonk, FuzzyB, CFR, scott59, Churchy liked this post
  17. #10
    The Dude Abides Nokie's Avatar
    Join Date
    Nov 2014
    Location
    Northern CA
    Posts
    3,516
    Very trick. Great pictures with the captions included to identify the components.

    That is an awesome watch.
    "Either He's Dead, Or My Watch Has Stopped....."
    Groucho Marx

  18. Likes popoki nui liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About Us
We are an independent and wide-ranging forum for watch enthusiasts. From mainspring to microchip, from Europe to Asia, from micro-brand to boutique - we cover it all. Novice or expert, we want you to feel at home. Whether it's asking a simple question or contributing to the fund of horological knowledge, it's all the same hobby. Or, if you like, you can just show us a picture of your new watch. We'll provide the welcoming and courteous environment, the rest is up to you!
Join us