**** Should I or shouldn't I ****

[Sedi]

Most digital use the CTL1616. Some older ones use a bigger one (I think CTL2016). Many ana-digis use the CTL920.
Some are listed here. It's in German but more or less self-explanatory:
https://www.abcde.de/solaruhren_ersatzteile_casio.html

[is that my watch]

Most digital use the CTL1616. Some older ones use a bigger one (I think CTL2016). Many ana-digis use the CTL920.
Some are listed here. It's in German but more or less self-explanatory:
https://www.abcde.de/solaruhren_ersatzteile_casio.html

handy thanks and yes self explaining

[is that my watch]

with the EQB-500 is the blue tooth button suppose to come out ?

[is that my watch]

well got this but not sure whether to fix or flip



so lets see :

new crystal £13.99
new solar battery £12
the bluetooth button come out ? is it suppose to do that ?? don't look like it broke or anything on the end ?
the top mode button is stuck in pop out when back off but sticks in when pushed when backs on ?
probably other damage assume not working as the solar battery is shot and it is tried it in another solar no joy

[Sedi]

The button is missing the little "latch" at the end. If you're lucky, that part is somewhere inside the watch. The spring probably too. The rest of the button seems fine. Not bent, o-rings still in place. Should be an easy fix. I'd try to restore it.

[is that my watch]

The button is missing the little "latch" at the end. If you're lucky, that part is somewhere inside the watch. The spring probably too. The rest of the button seems fine. Not bent, o-rings still in place. Should be an easy fix. I'd try to restore it.

it push's back in and seems to hold itself in place so yeah might have a quick mess with it to see how much damage their is mean if I can fix the button issues it might encourage me to throw the money in for the battery / crystal just seem throwing £20 or £30 in to it and don't work will be £20 or £30 I loose on flipping it thou with the marks to the case and my ocd wont stay that long in my collection if fixed but then again if working it might do a lot better mean what around £200 new so got to be a ton in it for working surely

[is that my watch]

well had a play fixed the mode button but the bluetooth is missing the spring and latch so means a new button to get the bits as in the clip and spring so that like thirty quid with post so over £50 to fix think to rich for me as no grantee it would work right after spending that on it so guess flipping it

[Sedi]

Some buttons don't have an extra spring but just push on elastic metal pieces on the module. Those can get stuck if the watch is taken apart and put together again. Happened to me once. The button didn't make proper contact with the module and the button got stuck. I'd check that maybe.

[Sedi]

You can see it on this pic in the upper corner where the "Thailand" writing is. The button pushes a metal latch on the module.
https://abload.de/img/bild006luen.jpg

[is that my watch]

deffo spring and one of those metal clips like you said neither was inside the watch but thanks for the thought