There are some watches that you are told are tool watches by marketing materials, and others you know are tool watches because you pick them up and say ďoh, yeah, thatís a frigginí tool watch.Ē The Ollech & Wajs OW C-1000 is emphatically one of the latter. ďSolid as a rockĒ is an expression that gets thrown around with little to back it up, but itís also the first thing that came to mind when taking the C-1000 out of the box. Itís small, hefty, sturdy, and nothing budges without some effort. In a literal sense, itís solid as a rock. In a day when vintage divers are the watch-of-choice, this unabashedly over-built 1000m diver is a breath of fresh, albeit heavy air.
The Ollech & Wajs C-1000 on an Admiralty Gray ADPT Strap

To be clear, the C-1000 isnít completely devoid of vintage influence, but itís far enough away from the original to be dubbed a modern watch, at least in my book. Based on the Caribbean 1000 models from the mid-60s, the C-1000 is a modern reinterpretation, not a recreation. An iconic watch, if rare and cultish, the original O&W Caribbeans utilized the robust Jenny 702 1000m case that featured odd fang-like lugs that actually get farther apart away from the case. Regardless, at 40mm x 45mm x 16mm, these cases were engineering marvels that make many of todayís divers seem bloated at best (for more on the original, click here).*
an original from the 1960’s

Todayís Ollech & Wajs took inspiration from the best parts of the original watch, the size and high water resistance, to make one of the more intriguing tool watches currently on the market. With an ETA 2824-2 inside and a price point well sub $2,000, the C-1000 is very worth a closer look.


Review: The Ollech & Wajs C-1000

Stainless Steel

ETA 2824-2



Domed Sapphire

Steel Bracelet

Water Resistance

39.5 x 49.5mm


Lug Width





Measuring a very specific 39.56 x 49.5 x 15.8mm to the top of the massive domed sapphire crystal, the C-1000 is a wonderful size for such an overbuilt watch. With a 1000m water resistance, you expect some chunkiness, and this has it, but itís not to the detriment of the design. Itís still very wearable and utilizes some nice design tricks to at least visually mitigate the thickness.
the first 56 have serialized crowns

From above, the lugs, which verge on the long side, are dominant, followed by the unique bezel design. Riffing on the original, the C-1000ís bezel features a thick metal rim and a thin mineral crystal insert. Typically inserts are wide, bold and the center of attention, but here the balance is different, giving the design a more technical, and frankly less explicitly ďdiveĒ look. Itís almost as if the wide metal rim is designed to protect the insert, which speaks to the rugged, tool nature of the C-1000. Either way, itís a nice change of pace and a simple design detail that separates the C-1000 from other dive watches currently on the market. The mechanism is 120-clicks and has an appealing action with a nice click and little back play.
On the right side is a massive 6.1mm screw-down crown that has a small stand-off from the case, making it extra easy to grasp. In keeping with the original design, there are no crown guards, which makes the crown look even more pronounced. Visually, the crown works with the design, adding another rugged, blunt element. Physically, itís not the greatest as I did find it pushed into my hand regularly.
a very solid case back

From the side, the 15.8mm thickness is apparent but well broken up between the various elements. The crystal is huge, adding a few millimeters at least with its large dome. The bezel is substantial, with a nice amount of coin-edging for grip. The mid-case makes up most of the mass, but features a nice, modernized design with swooping lugs that create a bisecting line, breaking it up visually. The case-back has a reassuring solidity to it, like a vault door for the movement, and actually gently domes, likely for ergonomics, completing the design. Though thick, O&W makes the best of it.


While the case feels like a modernized version of the 60ís original, the dial is more of a departure. Consisting of a flat, matte black surface, the dial features a printed index of white markers, with large rectangles per hour and small lines per minute/second. There are then large applied triangles at 12, 3 and 9, with brushed surrounds and acid green lume fill. At 6 is a date window with a brushed metal frame, and a small applied marker with lume fill. For hands, they went with large rectangles for hours and minutes with the same green lume found on the dial, and an arrow tipped seconds.
the thin bezel insert is a unique and appealing detail

At a glance, itís more of a pilotís dial than a diver, bringing to mind another 1000m tool watch, the MŁhle GlashŁtte SAR Rescue Timer, which is a hybrid of styles. While on the SAR I think the design makes sense as it was designed specifically for German SAR with their input, and not based on anything from the past, on the C-1000 I find it a bit off putting. While admittedly the original Caribbeans didnít have typical dive dials, per say, this dial feels a bit too far off the mark for such a tool diver. Moreover, lume is only found in the applied markers, limiting it to the cardinal points. In my book, a diver needs lume on all markers, and while the original watches featured a similar arrangement of applied and printed markers, the latter were most certainly still tritium.
Whatís going on here is that O&W has tried to create a cohesive design style between all of the watches in their current line up, the P-101, P-104, and C-1000. Looking at them side by side, they are successful in doing this, I just canít help but think they missed a bit on the conceptual side of the C-1000. At the very least, though all feature applied markers at 12, 3, 6 and 9 with lume, I think they should have added printed lume on the C-1000 as well. Oddly enough, the P-101 dial, which we reviewed here, bears a closer resemblance to the original Caribbean than the C-1000.
A modern interpretation

The bezel features a black insert under a mineral crystal ring. Iíll state the obvious, sapphire would have been nicer at this price point but mineral is still totally functional and unlikely to have issues. The insert puts its relatively meek surface area to good use with markers per minute, larger at intervals of five and numerals at 15, 30 and 45. Itís crowded, but it works and looks great. The Triangle at 0/60 and the subsequent five-minute markers up to 20 all glow.
An odd lume pattern for a diver


Inside of the C-1000 is an ETA 2824-2. The tool watch standard, itís a Swiss-made automatic with 25-jewels, hacking, hand-winding, date, 38hr power reserve and a frequency of 28,800bph. Though youíll likely never see it, O&W replaces the rotor with one they machine for a bespoke touch. Since the C-1000ís dimensions are likely more to do with the 1000m water resistance than the movement inside, there really isnít any reason for them to have used a 2892 or equivalent. Ultimately you know the 2824, you trust it, so not much else to say.
Straps and Wearability

The C-1000 is available on a beads-of-rice inspired steel bracelet with quite a dramatic design. Rather than the soft rounded ďbeadsĒ you might be used to, these are crested in the middle, giving them a much harsher and more aggressive look. I was amazed to see that this followed the design found back in the 60ís as it looks much more modern. In addition to being attractive, itís also comfortable, as the design allows for a bit more flex than standard three-link designs. As someone who has never fallen in love with BOR bracelets, I quite like the looks of this one and would be likely to keep it on the watch. That said, the C-1000 does take nicely to both nylon and leather straps, for a different look.
Beads or blades of rice?

On the wrist, the C-1000 wears as well as one could hope a 1000m diver would wear. You donít buy this kind of watch for its thin profile, lightweight or svelte lines, you get one because you want something insanely rugged and overbuilt – which means chunky and solid. Yet, the C-1000 is in between. One one hand, itís thick (though not a hockey puck) and heavy, and on the other, itís only 39.5mm in diameter. So, it manages to fit quite well. Honestly, the long lug-to-lug, which is a design detail that all of the modern O&Ws share, and the huge crown are the only potential wearability issues I found.

Extremely wearable for a 1000m diver

Thick but tolerable

Aesthetically, itís a pretty cool design as well. Itís got a unique look that is more modern than vintage but doesnít feel detached from the past either. Itís fairly minimal, with only the green lume standing out to call attention. I particularly like the bezel design with its slim insert, which gives the watch an extra-armored look, and a bit of a different presence than any other diver Iíve ever worn.

In general, Iíd say Ollech & Wajs were very successful with the C-1000. It pays tribute to some of the best aspects of the original Carribean 1000 design, especially its remarkable engineering, and yet feels like its own watch. Itís refreshing in that itís more of a tribute than a reissue, not necessarily relying on a nostalgic connection, or even awareness of the original to succeed. In that context, as a Swiss-made, 39.5mm, 1000M diver, with unique looks at under $1,700, itís also a pretty rare offering that stands its own in a crowded market of divers.
The C-1000 is a unique new offering in the overbuilt tool watch category

That said, I do think the dial could have been a little better thought out. While the use of triangles might make the C-1000 feel a bit more pilot-like than seems appropriate, I can live with that as a stylistic choice for the purpose of creating a cohesive line of watches, even if it feels a bit off. Itís the lume issue that is more concerning. Though no one is really going 1000m deep with this, or even likely a full 100m, having a partially lumed dial just feels like a miss for a dive watch and an easy thing to have gotten right. Nothing actually would have needed to change visually to add lume to the otherwise white rectangles on the dial.
With that said, for tool watch fans, the Ollech & Wajs C-1000 is a really solid new and different offering. Itís got a cool, unique look, a great name behind it and is very nicely made. With the C-1000 the revived Ollech & Wajs has created a solid little catalog of tool watches that manage to both keep a great, if not obscure, brand name alive, and offer something appealingly different. Ollech & Wajs

Images from this post:

The post Review: The Ollech & Wajs C-1000 appeared first on Worn & Wound.